What is WinSPS-S7 V5?
You can write your STEP7 program in STL, FBD or LAD.After this you can upload the written blocks to the on-board Software-PLC to simulate your program.
Use the PLC Mask window to change the state of the digital and analog inputs and watch the results.The intelligent window of the block editor shows only suitable addresses- so you can enter your code more efficiently.The live address location window shows you all locations of the current address in the block editor.The variable monitoring tool has a own web server. So you can watch the variables even on a smart phone or any other mobile device with a web-browser. You can also enable the speaker symbol in this table to here changing addresses over a wireless headset. The integrated Software-PLC has a TCP/IP interface. You can connect a TP/OP to it to test your TP/OP functionality. In the Pro-Edition of WinSPS-S7 you can also transfer the blocks into a real S7-PLC. Furthermore you have all tools for diagnostic or troubleshooting purposes. You can configuration your PLC with the integrated hardware configuration.
WinSPS-S7 V5 Most Important Facts
- WinSPS-S7 is a complete programming software for S7-PLC with many additional features
- Write your PLC program in STL, LAD or FBD
- Simulate your PLC program with a virtual PLC (PLC-Mask)
- Import- and Export your original SIEMENS S7-Project
- Build-In hardware configuration for (S7-300 PLCs, VIPA S7-PLCs, with Profibus-DP support)
- S7-Intellisense for faster and better programming experience
- Synchronize function: upload only modified blocks to the PLC with ease.
- The build-in software PLC can also be connected via TCP/IP (for third party software/hardware, e.g. operator panels)
- Special feature: watch the variable table on your smartphone
- Special feature: hear changing addresses in the variable table with a wireless head-set
- Pro-Edition for commercial use
- Pro-Edition (private use only)
- Standard-Edition (this edition can not connect to a real PLC)
- Starter-Edition (this edition can not connect to a real PLC, 1000 commands per cycle)
Can be used with the following operating systems:
- Windows 8 (32- and 64 Bit)
- Windows 7 (32- and 64 Bit)
- Windows XP (32 Bit)
- For all Editions: Home, Pro, Ultimate
WinSPS-S7 is available in different editions for different target group:
Pro-Edition (private use)
Pro-Edition Classroom Pro-Edition Multi-Classroom
|Commands per OB1-Cycle***||1000||>80.000||>80.000|
|Support for real S7-PLCs||No||No||Yes|
|Hardware configurator included||No||No||Yes|
*** Commands per OB1-Cycle: For example “A Q0.0” is one (1) command.The starter edition supports up to 1000 commands in the PLC program.
WinSPS-S7 Demo and full version
Frequently Asked Questions (FAQ):
- Q: Witch MPI/DP interfaces supports WinSPS-S7?
A: WinSPS-S7 supports: TCP/IP, MPI-Adapter serial, MPI-Adapter USB (with virtual COM Port), NETLink-Pro, NETLink-Pro-Compact, Netlin-Lite, IBH-Link, IBH-Link++, SIEMENS Interfaces (if the driver is installed)
- Q: If i order the software: How do you deliver the software?
A: You get a serial number via email. With the serial number you can upgrade the demo version to the full version.
- Q: What is the difference of WinSPS-S7 Pro and WinSPS-S7 Pro (private use only)?
A: The same program features. The edition “private use only” may only be used for private purposes.