Download http://bigtheme.net/joomla Free Templates Joomla! 3

Magnum AC Servo Drives- AXOR

Magnum AC Servo Drives- AXOR E-Series

Servo controller for brush-less synchronous servomotors from AXOR

Brush-less Servo Motor with integrated Leistugsteil type FAST BACK
FAST BACK now with a rated torque up to 7.5 Nm
AC servo motor with built-in position controller

  • Easy installation
  • Small footprint,
  • Integrated position control,
  • Programmable via RS232, Mod-Bus RTU,
  • Incl. programming software Speeder-One®,
  • Supply voltage 230 Vac,
  • CAN bus, CAN Open® Multi-turn encoder with CAN bus
  • Integrated brake chopper,

Servo MICRO-B or small, for AC servo motors MICRO B

  • compact servo controller for low voltage
  • analog servo controller 60 V,
  • Voltage range 20-82 Vdc,
  • very small footprint (95x135x28 mm)
  • Modes / speed repatriations: Hall effect sensor,
  • Armature voltage, encoder with Hall signal, resolver,
  • Integrated power supply for encoders 5 V,
  • Options: PWM + DIR Fashion

 

Servo MICRO-B-net-DIGITAL, for AC servo motors Micro-B-net digital

  • Digital Servo Drive, 230 Vac, to 7.5 Nm
  • Easy installation
  • Very compact (WxHxD = 58x144x80 mm)
  • Optional encoder or resolver feedback for servo motors up to 7.5 Nm
  • Integrated power supply 110/230 V with EMC Line Filter
  • Programmable via RS232, Mod-Bus RTU, i ncl.
  • Programming software Speeder-One®
  • Options:
    • RS485
    • CAN bus, CAN-open
    • Multi drop interface RS232 to CAN bus
    • Ext. Ballast resistor (Others on request)

Servo MICRO-B-net-DIGITAL, for AC servo motors Mini-Magnum

  • Digital Servo Drive, 3 x 380-480 V AC, for servo motors up to 5 A rated current
  • Easy installation
  • Very compact (WxHxD = 66 x 201 x 141 mm)
  • Optional encoder or resolver feedback for servo motors up to 7.5 Nm
  • Integrated power supply 380 to 480 V with EMC Line Filter
  • Programmable via RS232, Mod-Bus RTU,
  • Include programming software Speeder-One®
  • Options:
    • RS485
    • CAN bus, CAN-open
    • Multi drop interface RS232 to CAN bus
    • Ext. Ballast resistor (Others on request)

Servocontrollers MAGNUM, to 480 V, for AC servo motors MAGNUM-400

  • Digital Servo Drive, 400 Vac, to 32 Nm
  • Easy installation
  • Optional encoder or resolver feedback for servo motors up to 32 Nm
  • Supply voltage of 220 to 480V with EMC Line Filter
  • Programmable via RS232, Mod-Bus RTU,
  • include Programming software Speeder-One®
  • Options:
    • RS485
    • CAN bus, CAN-open
    • Multi drop interface RS232 to CAN bus
    • Ext. Ballast resistor (Others on request)

AC Servo Motors

Supersax 1000

  • Highly dynamic brushless servo motors
  • Torque range of 0.35 Nm to 32 Nm
  • Two re-circulation systems to choose from Encoder 2048 pulses or resolver
  • 5 rated voltages 44, 95, 145, 230 and 400 V,
  • Degree of protection IP54,
  • Options:
    • Brakes
    • Degree of protection IP65, IP65S (with shaft seal) Special shafts and flanges
    • Cable output connector instead
    • Transmission
    • (Others on request)
  • Download Datasheet

Additional accessories:

  • Single and Multiachssteuerungen
  • Comfortable synchronous control
  • Print mark detection
  • Programmable Limit Switch flying saws
  • Wrap controls
  • Service / Services:
    • Machine retrofits
    • Commissioning
    • Custom settings

The servo drives are primarily used as a speed controller or positioning drives in general mechanical engineering, robotics, packaging machinery, textile machinery, tool machines, handling equipment and much more.

Technical Data and Software

Mini Magnum Datasheet MASTERSPEED Service Manual
SPEEDER ONE Interface Manual. SPEEDER ONE Axor Software

Communication Cable for Speeder One interface

Magnum_Drive_RS232_Serial-Communication

 

DB9 Female Connector:

DB9 Male Connector:

How to Connect the Drive to PC?

 

  1. Use DB9 M/FM Connector to make Communication Cable as per given picture.
  2. Apply just +24VDC Logic Voltage to Drive and Connect the Drive through Cable with PC.
  3. Starts the Speeder One Interface Program and follow the guidance in SPEEDER ONE Interface Manual.

speederone-up

Related Post

About engrsajidrehman

SAJID REHMAN is an Electronics Engineer and working in his field for many years. His in depth field of experience is hardware Repairing and troubleshooting, especially AC/DC Drives, Electronics Controllers, Computer hardware and other PCBs. Beside all this he is a Web Designer, Graphics Designer and Content writer. You can contact him on Google and Linkedin. Thanks